EVCO S.p.A. | EVJ 200 | Instruction sheet ver. 2.0 | Code 104J200I203 | Page 4 of 4 | PT 18/17
Relay K3
SPST, 8 A res. @ 250 VAC
Relay K4 (not available in EVJ203 and
EVJ213)
SPST, 5 A res. @ 250 VAC
Relay K5 (not available in EVJ203, EVJ213,
EVJ204, EVJ214, EVJ214N7VXXRXV, EVJ224
and EVJ234)
SPST, 5 A res. @ 250 VAC
The device guarantees double insulation between each digital output connector and the rest
of the components of the device
Type 1 or Type 2 Actions
Type 1
Additional features of Type 1 or Type 2
actions
C
Displays
Custom display, 3 digit, with function icons
Alarm buzzer
Incorporated
Incorporated sensors:
Bluetooth Low Energy (available in
EVJ214N7VXXRXV, EVJ234 and EVJ235).
Communications ports
1 TTL MODBUS slave port for EVconnect APP
or BMS
1 port for SD card data-logger module
EVBD05 (not available in EVJ203, EVJ204,
EVJ205, EVJ224 and EVJ225)
For EVJ214N7VXXRXV, EVJ234 and EVJ235 According to European R&TTE Declaration of
Conformity this device can be used in the following Countries: Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Norway, Poland Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland, The Netherlands and The United Kingdom.
N.B.
The device must be disposed of according to local regulations governing the collection
of electrical and electronic waste.
This document and the solutions contained therein are the intellectual property of EVCO and thus
protected by the Italian Intellectual Property Rights Code (CPI). EVCO imposes an absolute ban on the
full or partial reproduction and disclosure of the content other than with the express approval of EVCO.
The customer (manufacturer, installer or end-user) assumes all responsibility for the configuration of the
device. EVCO accepts no liability for any possible errors in this document and reserves the right to make
any changes, at any time without prejudice to the essential functional and safety features of the
equipment.
EVCO S.p.A.
Via Feltre 81, 32036 Sedico (BL) ITALY
Tel. 0437/8422 | Fax 0437/83648
email info@evco.it | web www.evco.it
To Previous Page
Loading...
Need help?
General
