Need help?Do you have a question about the Evco EV3 200 WEB and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Display | LCD |
| Inputs | Digital, Analog |
| Outputs | Relay, Analog |
| Communication | Ethernet |
| Protection | Short Circuit |
| Certifications | CE |
Details user responsibilities, device disposal, and environmental considerations for the controller.
Explains safety symbols, hazard levels, and requirements for personnel working with the device.
Covers critical safety warnings for electrical hazards, explosion risks, and potential equipment malfunctions.
Provides a general overview of the EV3 200 Web controller's purpose and primary functions.
Details the core features and technical capabilities of the EV3 200 Web controller.
Lists the accessories compatible with the EV3 200 Web controllers, including part numbers.
Details product compliance, construction, power supply, operating, and storage conditions.
Specifies the controller's digital inputs, analogue inputs, and serial communication interfaces.
Guides users through preliminary steps, safety, and environmental considerations before assembly.
Provides physical dimensions and general installation instructions for the EV3 200 Web controller.
Specifies the required minimum clearances around the EV3 200 Web for proper ventilation and operation.
Details crucial wiring practices, guidelines for terminal blocks, and permitted cable lengths.
Presents the overall wiring diagram, showing terminal connections and interface layout.
Describes the main user interface screen, touch keys, and icons for basic operation.
Covers powering on/off, keypad unlocking, setting setpoints, and activating manual defrost.
Explains key-activated functions, AUX output, and how to access controller parameters.
Introduces the defrost cycle, its phases, and the two main types of defrost operations.
Details various adaptive defrost strategies including calibration, normal work, and time-based activation.
Explains standard defrost methods: electrical heaters, hot gas cycle, and defrost when compressor stops.
Details parameters and operation for regulating heating and cooling temperatures, including differentials.
Explains temperature regulation within the neutral zone, considering heating and cooling requests.
Describes compressor activation conditions, delays, and related configuration parameters.
Explains how the controller manages a second compressor when configured for dual compressor operation.
Details evaporator fan operation modes, activation conditions, and behavior during defrost and dripping.
Describes the conditions under which the condenser fans are activated.
Explains how the energy saving function can be activated and its configuration parameters.
Introduces remote configuration methods via smartphone/tablet app or PC software.
Illustrates configuration setup using EVLink Wi-Fi app and PC via USB connection.
Shows the configuration setup when connecting the device via Ethernet for remote communication.
Guides through the initial setup and configuration of the EV3 200 Web using a PC.
Provides step-by-step instructions for configuring the EV3 200 Web via the EVLink Wi-Fi mobile application.
Presents a comprehensive table of all configurable regulation parameters with their descriptions, units, ranges, and defaults.
Lists common alarms, their causes, effects, and recommended solutions for troubleshooting.
To Next Page
