Evco EV3 200 WEB - 2. Technical Specifications; 2.1 Overall Technical Specifications; 2.2 Input;Output (I;O) Capabilities

1143W24E4.00 · EV3 200 Web 03/2021
| 8 |
2. TECHNICAL SPECIFICATIONS
AllthesystemcomponentsoftheEV3 200 WEB controllers meet the requirements of the European Community (EC) for electric
equipment.Theymustbeinstalledinacasingorotherlocationdesignatedforthespecificambientconditionsandtokeepthe
possibility of involuntary contact with dangerous electrical voltages to a minimum. Use metal casings to improve the immunity
of the EV3 200 WEB system to electromagnetic fields. This equipment meets EU requirements as shown in the tables below.
WARNING
MALFUNCTIONING OF THE EQUIPMENT
Do not exceed the nominal values given in this section.
2.1 TECHNICAL SPECIFICATIONS
2.1.1 EV3 200 WEB
Type Description
The product complies with the following harmonised
standards:
EN60730-1 and EN60730-2-9
Device construction: Built-in electronic device
Device purpose: Operating control device
Type of action: 1
Pollution category: 2
Overvoltage category: III
Rated impulse withstand voltage: 4000 V
Power supply: 115...230Vac,±10%,50/60Hz
Consumption: 10VAmaximum
Ambientoperatingconditions:
-10...50°C(14...122°F)10…90%RHnon-condensing
Transportation and storage conditions:
-20...70°C(-4...158°F)10…90%RHnon-condensing
Software class: A
Environmental front protection: IP65
Clock(RTC): Built-in lithium battery
Clockdrift: ≤60s/monthat25°C(77°F)
Battery life: 30 days
Battery charging time: 24 h through device’s power supply
Data memory: 32 MB
Data memory per device: ~2.7 MB
2.2 I/O FEATURES
2.2.1 EV3 200 WEB
Type Description
Digital inputs: 2 voltage-free digital inputs
Analogueinputsfortemperature: 2 analogue inputs for NTC probes
Digitaloutputwithnon-hazardousvoltage(SELV): 4 relay outputs
Serial: 1EthernetRJ4510/100MACserialport
1 USB serial port