Do you have a question about the Evcon DGAT056BDC and is the answer not in the manual?
Steps for removing the old vent system and installing a new one.
Instructions for installing a vent system in a new home.
Visual representation of furnace dimensions for DLAS and DGAT/DGAM series.
Requirements to follow local codes and national standards for installation.
Guidelines for positioning the furnace for proper access and servicing.
Required clearances from combustible materials for alcove or closet installation.
Specifications for return air openings in closets for safe furnace operation.
Requirements for return air systems installed in floors or ceilings.
Instructions for properly measuring and cutting the roof opening for the jack.
Steps for securing the roof jack flashing and ensuring a watertight seal.
Step-by-step guide for installing the DLAS series furnace.
Step-by-step guide for installing the DGAT & DGAM series furnaces.
Guidelines for connecting the furnace to the electrical supply and controls.
Wiring instructions for a 2-wire thermostat for heating only.
Electrical schematic diagram for the DGAT series furnace wiring.
Procedures for safely installing and checking gas supply lines.
Final steps for furnace installation, including door installation and checks.
Chart detailing deration requirements for different elevations and gas types.
Comprehensive list of parts for DGAM, DGAT, DLAS series furnaces.
Steps for converting the furnace between natural gas and propane.
Information on natural gas and propane supply, including pressure requirements.
Explanation of the furnace's system switch, fan switch, and limit controls.
Step-by-step guide for safely lighting the furnace burner.
Procedure for safely shutting off the gas supply to the appliance.
Loading...