3
Getting Started
· Remove the fireplace from the box.
· Remove all the packaging and place it inside the box and either store or dispose of safely.
Package Contents
· Electric Fireplace.
· Wall Mounting bracket.
· Pebble Pack
· Screws and Wall plugs.
· Remote control.
· Instruction Manual.
Features
· Wall Mountable
· Dancing Flame Effect.
· Remote Control.
· Detachable Glass Front.
· Thermal Cut-out.
· Two Heat Settings - 750W and 1500W.
Quick Reference Guide
· Prior to installation, please ensure that your power-outlet is suitable for your fireplace against
both voltage and capacity.
· Your fireplace may emit a slight, harmless odor during its first use. This odor is a normal
condition caused by the initial heating of internal fireplace parts and it will not occur again.
· It is normal for fireplace to make rattling sound for a short duration of time, during its first
use.
· If your fireplace does not emit heat, please ensure the fireplace Switch is on. For further
information, please refer to Troubleshooting section of this manual.
Helpful Advice Before Installation
· Please retain all packaging until you have checked and counted all the parts and other package
contents.
· The package contains small apparatus which should be kept away from young children and
infants.
· We suggest that you move all the smaller parts into a container, in order to reduce the risk of
losing them.
· At least 2 people are required to install this fireplace.
· It is recommended to place your fireplace near an existing outlet, for ease of electric
connection.
· Store your fireplace in a dry, safe and dust-free place while drilling, for fireplace installation.
· Do not attempt to wire new outlets or circuits. To reduce the risk of fire, electric shock or
injury to persons, always have a licensed electrician perform maintenance and other repairs.
To Next Page
Loading...