2
2. Locate four pedestals C, then turn over and install the
1-1/2 inch (38 mm) spring D with screw E in each
pedestal. Position spring as shown. Do not overtighten
screw.
E
D
D
1. Place mat A on floor.
2. Place feet
B on either side of mat, as shown.
3. lnstall toy bar C into feet, as shown. Press toy bar down
firmly until it snaps into place. Pull up on the toy bar and
stalk toys installed into the feet to make sure they are locked
in place.
A
C
B
B
Stage 1 is used for infants from birth to 4 months old.
Stage 1
Stage 2 is used for infants 4 months old (who can hold up head and neck unassisted)
to walking age and under 30 inches tall.
C
B
A
1. Turn base A upside down and locate four stabilizer feet B.
Insert one side of foot B into the foot bracket hole and twist
the foot until the other side snaps into the opposite hole, as
shown. Repeat until all four stabilizer feet are installed.
To use stabilizer feet:
Flip the four stabilizer feet out from beneath base to prevent
ExerSaucer
®
from rocking.
Stage 1
Stage 2
Stage 2
B
To Next Page
Loading...
Need help?
General
