16 17
Route the LATCH har-
ness and hook through
the belt path .
Refer to your owner’s manual to locate the lower
anchors on your vehicle seat. Attach the right
hook to the right anchor , and the left hook to
the left anchor. DOUBLE CHECK that the hooks are
fully engaged by pulling hard on the LATCH harness.
1
2
Using the Child Restraint With the 5-point Harness: 9 – 21.3 kg (20 – 47 lbs) LATCH Installation
• ONLY use for securing child restraint to lower LATCH
anchor points.
• ALWAYS read and follow exactly the instructions
which accompany your vehicle and child restraint.
• NEVER attach two hooks to one vehicle lower anchor
point.
• DO NOT use the vehicle seat belts to install a child
restraint when using the LATCH system.
• This LATCH system is intended to be used
ONLY as
described in these instructions. Serious injury or death
may result from misuse.
• ALWAYS be sure that the LATCH hook is fully engaged
onto the LATCH anchor point by pulling hard on the
harness. If it is not totally engaged, the LATCH system
will not secure your child restraint. Serious injury or
death may result.
• To avoid a strangulation hazard, you MUST store
the unused LATCH harness, with all slack removed, in
storage area on the back of the seat. Roll or fold the
excess LATCH strap and secure with a rubber band to
prevent serious injury to vehicle occupants.
• In addition to these instructions, read and follow your
vehicle owner’s manual regarding installation of child
restraints and LATCH. If there is a discrepancy, follow
your vehicle owner’s manual.
LATCH is a system for attaching the child restraint to
your vehicle seat. It is to be used in place of your vehicle‘s
seat belts, and can only be used in vehicles with LATCH
anchors. Your vehicle owner’s manual may refer to this
system as ISOFIX or Universal Anchorage System.
Installing Your Child Restraint
Using the LATCH System
Hook
Adjuster
Harness
Know Your Latch
WARNING
To Next Page
Loading...
Need help?
General