10
ASSEMBLING YOUR PRODUCT
3. To attach all-terrain rear
wheels, push wheel onto
rear leg tube until it
clicks into place. Repeat
on other side.
Pull on wheels to make
sure both of them are
securely attached.
CLICK!
CLICK!
To remove, press tab on
underside of wheel mount and
pull wheel off product.
WARNING
To avoid injury to fingers or hands,
care must be taken when opening
and closing the product to prevent
injury in hinge areas.
1. Lock parent’s handle onto
handle mount by pushing
on both sides until each
side clicks into place.
2. Pull on parent’s handle
to ensure both sides are
locked in place.
CLICK!
To Next Page
Loading...
Need help?
General