96
CLICK!
Booster Mode (Forward-Facing Only)
Installing the Booster
8. Push Base against vehicle seat
back. Tension LATCH/UAS Strap
by pulling on loop until snug,
making sure not to overtighten.
9. After tightening LATCH/UAS,
secure excess strap under the
LockStrong.
7. Attach LATCH/UAS Connectors
to vehicle Lower Anchor Bars.
Connectors will make an audible
CLICK when attached. Make sure
they are attached by pulling rmly
on connectors. If equipped with
Mini-Latch, DO NOT pull on red
Release Strap.
To Next Page
Loading...
