97
Booster Mode (Forward-Facing Only)
Installing the Booster
10. Apply pressure to fully close the
LockStrong. The lock indicator will
turn GREEN when fully closed.
NOTE: If belt tensioner does not
fully close (lock indicator still RED),
open the LockStrong and try
loosening the LATCH/UAS strap
slightly.
11. Pull the Tether Adjuster Strap to
tighten.
12. Install Seat Shell to Base (pg.
57), move seat to most reclined
position and rotate FORWARD-
FACING, then lock into position.
13. Conrm that the seat is in a
locked position by checking that
the Seat Lock Indicator is GREEN.
To Next Page
Loading...
