Evenflo REVOLVE360 User Manual

110
Removing/Replacing the Seat Cover
To Replace the Seat Cover:
1. Lower the headrest.
2. Starting from the top of the seat,
place the back pad around the
upper Seat Shell, making sure to
secure the two plastic tabs on the
back of the seat.
3. Secure the ap on the front side of
the seat to the Seat Shell using the
two hooks on the ap.

Evenflo REVOLVE360 Specifications

General

Type	Convertible Car Seat
Rotation	360-degree rotation
Rear-Facing Weight Capacity	4-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Harness	5-point harness
Headrest Positions	10
Safety Standards	FMVSS 213
Side Impact Protection	Yes
Machine Washable Cover	Yes
Installation	LATCH or seat belt