Evenflo REVOLVE360 User Manual

112
Removing/Replacing the Seat Cover
6. Pull seat pad over seat base. Pull
harness adjustment strap through
slot at front of seat pad, then pull
Buckle Strap through appropriate
slot in seat pad (see pg. 44).
NOTE: It is not necessary to remove
the cup holders in order to replace
the seat pad.
7. From the front of the seat, make
sure the Harness Straps are
properly routed and secure the
hook-and-loop fasteners connecting
the back pad to the seat pad.
buckle
storage

Evenflo REVOLVE360 Specifications

General

Type	Convertible Car Seat
Rotation	360-degree rotation
Rear-Facing Weight Capacity	4-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Harness	5-point harness
Headrest Positions	10
Safety Standards	FMVSS 213
Side Impact Protection	Yes
Machine Washable Cover	Yes
Installation	LATCH or seat belt