Eventide H9 - [EXPTIP] - Select Function of Auxiliary Switch Tip [SWITCH, PEDAL]; [SER*] - Serial Number (H9-XXXXX); [SW VER] - Software Version

H9 User Guide System Mode
44
[EXPTIP] – Select function of Auxiliary Switch Tip [SWITCH, PEDAL]
Press the HOTKNOB button to select. The rear panel 1/4 inch stereo phone jack labeled, “EXP”
can be connected to an expression pedal or up to three auxiliary switches. The function of the
“tip” must be selected to respond to an expression pedal or aux switch. The default function
is [PEDAL].
Press the PRESETS button once to back-up one level to UTILITY menu.
Press the PRESETS button twice to go to top level System menu.
[SER*] – Serial Number (H9-xxxxx)
Press the HOTKNOB button to display your H9’s unique serial number. The five digit number
will scroll by. You’ll need to know this number to request support and to download software
updates.
Press the PRESETS button once to back-up one level to UTILITY menu.
Press the PRESETS button twice to go to top level System menu.
[SW VER] - Software Version
Press the HOTKNOB button to display your H9’s software version.
Press the PRESETS button once to back-up one level to UTILITY menu.
Press the PRESETS button twice to go to top level System menu.