Everbilt 9236046 - Installation

5 HOMEDEPOT.COM
Please contact 1-800-305-1726 for further assistance.
Installation
1
Separating the slides
Press the release lever (1) and remove the drawer slides (B) from
each bracket (A).
A
B
1
2
Marking the slide locations on the
drawer
Mark 1-1/4 in. (32 mm) from the bottom of the drawer. Align the
top of the drawer slides (B) with the marks on each side of the
drawer.
1-1/4"
(31.8mm)
B
3
Installing the drawer slides
Ensure each drawer slide (B) is level and then secure to the sides
of the drawer with screws (C).
C (x3)
B
4
Positioning the drawer
Determine the drawer position. Mark the bottom of the drawer
front. Place the brackets (A) onto the drawer slides (B) and
measure “X”.
X
A
B