Everchill JC-128 - Page 12

a
a
A
Screw
7. Using the three hex-head screws removed earlier, reinstall the bottom hinge on
the opposite side.
a
A
Screws
8. Using a putty knife, gently pry upward on the back edge of the top hinge cover
to remove.
a
A
Hinge Cover
9. Using a ⁵⁄₁₆" hex-head wrench, remove the two screws fastening the top hinge,
and then remove the hinge.
a
A
Top Hinge Screws
10. Using the putty knife remove the hole plug from the door and the two hole
plugs from the cabinet, and then replace them in the holes remaining from
removing the top hinge.
10
ENGLISH