a a
A
Hole Plug
11. Reinstall the top hinge on the opposite side.
a
A
Top Hinge Screws
12. Replace the top hinge cover.
13. Stand the beverage cooler upright, and check that the door is aligned with the
cabinet.
NOTE: If the top of the door is not aligned with the cabinet, loosen the top
hinge screws, adjust door and re-tighten top hinge screws.
STEP 3 - COMPLETE INSTALLATION
IMPORTANT: If the beverage coolerr has been placed in a horizontal or tilted
position for any period of time wait 2 hours before plugging it in to allow the
refrigerant to settle.
•
Plug into a grounded 3 prong outlet.
11
ENGLISH
To Next Page
Loading...