EVERCROSS EV85F - Troubleshooting

06
4. Troubleshooting
Error Code
“E1/F1”
“E2/F2”
“E3”
“E4”
“E5”
“E6”
“E7”
“E9”
Failure Description Solution
Brake Failure
Accelerator Failure
Communication Failure
Overcurrent Protection
Undervoltage Protection
Overvoltage Protection
Hall Wire Damage
Bias Failure
Check if the brake wire is connected properly or
replace the brake lever.
Check if the accelerator wire is connected
properly or replace the accelerator.
Check if the communication wire between the
dashboard and controller is connected properly
or replace the dashboard and the controller
Replace the controller
Replace the battery
Stop riding and idling to consume power.
Check if the motor wire is connected properly or
replace the motor.
Replace the controller
(‘E’ is startup error / ‘F’ is running error)