Everflo EF2200-QA User Manual

Owner’s Manual
Instructions for Assembly, Testing, Operation, Servicing, and Storage
12V Diaphragm Pump: For use with agricultural pesticides and other
liquids**
WARNING
READ and UNDERSTAND the Owner’s Manual completely before using this
pump. Assemble, test, and use only in accordance with the Owner’s Manual
instructions.
READ and FOLLOW chemical safety instructions. Pesticides are hazardous
chemicals.
KNOW emergency procedures BEFORE handling chemicals. Pump leaks, bodily
chemical contact, poisoning, and spills require immediate response.
AVOID inhaling, ingesting, or coming into contact with any chemicals.
WEAR personal protective gear when operating, cleaning, and servicing the
pump.
KEEP pump and spray materials away from children and pets. Pesticides are
especially toxic to them.
DO NOT TURN ON POWER to pump until ready to spray in order to avoid
unintentional spray release.
Improper use of the pump or handling of chemicals could result in serious
injury or illness to the operator or nearby persons/animals, or could cause
damage to the environment.
** This pump is recommended for use in spraying non-flammable liquids such as pesticides, water
for plants/trees or dust control, ice control chemicals, or water-based non-flammable sealants or
stains for outdoor wood surfaces. However, WE RECOMMEND THAT THE PUMP NOT BE
USED FOR OTHER PURPOSES ONCE IT HAS BEEN USED FOR SPRAYING PESTICIDES.
Any chemical will leave some residual in the pump, even after the pump has been properly cleaned.
These residual chemicals can have unexpected effects on future uses. For example, spraying water
or other liquids that are contaminated with residual pesticide may result in unforeseen hazards to
plant or animal life.
Any Questions, Comments, Problems, or Parts Orders
Call EverFlo Product Support 1-800-864-1649
ITEM NUMBERS:
EF1000 1.0 GPM
EF2200 2.2 GPM
EF2200-QA 2.2 GPM
EF3000 3.0 GPM
EF3000-QA 3.0 GPM
EF4000 4.0 GPM
EF4000-QA 4.0 GPM
EF5500 5.5 GPM
EF5500-QA 5.5 GPM
(Includes Boxed Models)
SERIAL NUMBER: __________

Everflo EF2200-QA Specifications

General

Brand	Everflo
Model	EF2200-QA
Category	Water Pump
Language	English

Summary

Owner's Manual Introduction and Safety Fundamentals

General Safety Warnings

Crucial safety precautions for operating the pump with chemicals.

Hazard Signal Word Definitions

Intended Use and Limitations

Pump Application Guidelines

Details the recommended uses and restrictions for the pump.

Operation and Safety Information Overview

Summary of Important Safety Information

Overview of critical safety points for assembly and operation.

Chemical Accident Procedures

Emergency Response Guidelines

Step-by-step actions for spills, leaks, contact, or poisoning.

Installation Procedures

Pump Mounting and Plumbing

Instructions for physically securing the pump and connecting hoses/fittings.

Electrical Connection and Testing

Disconnecting and Final Assembly Check

Preparing the Pump for Use

System Inspection and Repair

Inspecting hoses, lines, and fittings, and performing necessary repairs.

Using the Pump

Assess Conditions and Clear Area

Checking wind speed and clearing the work area before spraying.

Pump Operation and Pressure Switch

Turning on power, pump cycling, and pressure switch function.

Handling Unattended Use and Clogs

Procedures for leaving the pump unattended or if it becomes clogged.

Cleaning and Decontamination

Draining and Flushing the Pump

Steps for draining unused chemicals and flushing the pump system.

Personal Decontamination

How to decontaminate yourself after handling chemicals.

Storage and Removal from Storage

Preparing for End-of-Season Storage

Adding antifreeze to protect the pump during storage.

Removing Pump from Storage

Steps to drain antifreeze and flush the system before use.

Troubleshooting and Servicing

Pre-Service Safety Checks

Safety precautions before attempting any troubleshooting or service.

Common Problems and Solutions

A table detailing common issues and their resolutions.

Specifications and Parts Breakdown

Pump Model Specifications

Technical details including flow rate, pressure, dimensions, and materials.

Exploded Views and Part Identification

Diagrams showing pump components and their part numbers.