The pump is intended for use in spraying bleach concentrations of 3% or less.
SPRAYING CHEMICALS:
Hazardous chemicals must be handled with caution as directed throughout this manual
and on the chemical label.
The pump is intended for use in spraying chemical in liquid form only. The pump is NOT
intended for use in spraying chemicals in dry or aerosolized form, or for use with
fumigants.
Always flush the pump after each use to clean out the chemical. The life of the pump will
be shortened if it is not flushed after each use.
WE RECOMMEND THAT THE PUMP NOT BE USED FOR OTHER
PURPOSES. Any chemical will leave some residual in the pump components, even after
the pump has been properly cleaned. These residual chemicals can have unexpected
effects on future uses.
NOTE: The pump will be damaged, and warranty voided if used to apply any petroleum-
based product (gasoline, diesel, kerosene, or oil).
NOTICE: Not for use on painted wood surfaces. Use only on hard, non-porous surfaces.
Contact Everflo Product Support at 1-800-864-1649 for any questions about
the appropriate use of the pump and/or optional accessories.
To Next Page
Loading...
