3
Important safety instructions
These warnings are provided in the interests of your safety. Ensure you fully understand
them before installing or using the appliance.
Your safety is not paramount importance. If you are unsure about the meaning of these
warnings contact the Customer Care Department for assistance.
Intended use
The refrigerator is intended for use in the home. It is suitable for the storage of food at
low temperature. If the appliance is used for purposes other than those intended or used
incorrectly, no liability can be accepted by the manufacturer for any damage that may be
caused.
Alterations or changes to the refrigerator are not permitted for reasons of safety.
If you use the refrigerator in a commercial application or for purposes other than the
cooling of foods, the manufacturer accepts no liability for any damages that may occur.
Prior to initial start-up
Check the appliance for transport damage. Under no circumstances should a damaged
appliance be plugged in. In the event of damage, please contact your supplier.
Refrigerant
The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the
appliance, a natural gas with a high level of environmental compatibility, which is
nevertheless flammable. During transportation and installation of the appliance, ensure
that none of the components of the refrigerant circuit becomes damaged.
The refrigerant (R600a) is flammable.
Caution: risk of fire
If the refrigerant circuit should become damaged:
z Avoid open flames and sources of ignition.
z Thoroughly ventilate the room in which the appliance is situated.
The instructions shall include the warnings:
—Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
—Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
—Do not damage the refrigerant circuit.
To Next Page
Loading...
