Customer Service 1-888-707-1880 Maurice Pincoffs Canada Inc. ©2011
Email: customerservice@pincoffs.ca
STEP 2: HANDLE BAR ASSEMBLY
1. Install the two 17m/m Wave Washers (83) onto the Left and Right side of the Handle Bar
axle.
2. Slide the Left (10) and Right (11) Handle Bars onto the appropriate side of the axle. The
handlebars have a small sticker on them indicating L (left) and R (right).
3. Put the two 5/16"×23×1.5T Flat Washers (79) onto the two 5/16"×15m/m Hex Head Bolts
(59) and install, and tighten, in the threaded holes in the ends of the axle.
To Next Page
Loading...
