Everlast PD1 - Operating the Time Mode

ENGLISH l 9
OPERATING THE PEDOMETER
3. Press ST/STP key to switch display: day of the
week/ month
4. Press RESET key to toggle the key tone. It will
display the sign “ ” when the key tone is turned on.
5. Press RESET key for 2 seconds to switch between
me 1 and me 2. There will be a signal "T2" when
the me 2 is selected.
Operaon instrucon:
1. Press MODE key to switch to the next mode
2. Time seng:
Holding ADJ/EL key in me mode, it will enter me
seng mode aer 2 seconds’ flashing of “ADJ;
Press MODE key to switch the seng items in the
following order: hour, minute, second, year, month,
day, 12/24 hour; At one seng items, pressing
ST/STP or RESET key to increase/decrease the value,
pressing and holding ST/STP or RESET key to
increase/ decrease the value rapidly.(Note: when
the second value is below 30, it will come to zero by
pressing ST/STP or RESET key . When the second
value is above or equal to 30, it will add 1 on the
minute digit by pressing ST/STP or RESET key) ;
then press ADJ/EL key to confirm seng and go back
to me display mode.