eversense 365 - Page 7

5
Eversense 365 CGM System Quick Reference Guide
LED Status Indicators during smart transmitter use:
LED Status Status Action
Blinking blue when the
button is tapped 3 times in
5 seconds
Pairing mode Pair smart transmitter with mobile
device.
Does not blink when the
button is tapped
Smart transmitter o Touch and hold in the center of the
transmitter for 3 seconds to turn on.
Blinks green (once) when
the button is tapped
~24 hours battery power
remaining
No immediate action required.
Blinks orange (once) when
the button is tapped
Low battery, less than
24 hours battery power
remaining
Charge battery soon.
LED is orange for one
minute
An alert has been
triggered
Check the app on your mobile
device to understand the alert.
Blinks orange Transmitter and sensor
communication interrupted
or not yet linked
Position transmitter over sensor site.
If prompted, link sensor.