EasyManua.ls Logo

EVERSPRING SE203 - Page 3

EVERSPRING SE203
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
clearance.
Standby(Arm
mode)
LED flashes once
every 15 seconds
Entry/Exit Delay
LED flashes with
beep sounds
T>5 second, Beep
once every
second
T<6 second, Beep
two times every
second
And then beep
rapidly in final 5
seconds
0= quiet
Fully Arm/Partial
Arm the system
Flash 1 time
Long Beep one
time
Disarm the
system
Flash two times
Beep- Beep two
sounds
Alarm
LED & Strobe
flashes
180
seconds(default)
Low battery
LED flashes 20
times
APP Configuration Setting
Go to device list, press and hold SE203 icons for 2secs can get into sensor
information page, press settings on the top right to get into the following selections.
Siren Sound
-High
-Low
Exit/ Entry delay beep sound
-Enable
-Disable
Siren alarm sensor tamper during Disarm
-Enable
-Disable
Beep sound when Arm/Disarm
-Enable
-Disable
Strobe light during alarm
-Enable
-Disable
LED periodic blink when Arm
-Enable
-Disable