Everus HGM408 - How to Use; Chopping Meat

HOW TO USE
1
- Always unplug the appliance before you reach into the blender jar with your ngers or an object (e.g. aspatula).
- Wait until moving parts stop running before you remove the lid of the bowl or jar.
- Never use any accessories or parts from other manufacturers or that Supplier does not specically recommend. If you use
such accessories or parts, your guarantee becomes invalid.
- Do not exceed the maximum content indicated onthe food processor bowl or the blender jar.-Do not use the juicer if the
sieve is damaged.
- Consult the tables in this user manual for the correct quantities and processing times.
- Thoroughly clean the parts that come into contact with food before you use the appliance for the rst time.
- Let hot ingredients cool down before you processthem (max. temperature 80°C/175°F)
- Please wash thoroughly those components which may contact the food before using the product.
- This product has a dual safety system. It will work only after all parts are properly installed.
Place the Bowl on the Main Body, the angle between the handle and the
main body safety switch is about 55 degrees (before placing, make sure
that the Main Body is on a at desktop and it is not shaking)
2
Chopping Meat