Slicing & Shredding
1
2
3
4
Place the Bowl on the Main Body, the angle between the handle and the
main body safety switch is about 55 degrees (before placing, make
sure that the Main Body is on a at desktop and it is not shaking)
Hold the handle of the Bowl and turn it clockwise into the Main Body. When the
"▼" on the Bowl is opposite to the Main Body “ ” or a "click" is heard, it indicates
that the Bowl has been rotated in the
right position.The product does not work if the Bowl is not in the right position
Place the Adjustable Slicing Disc on the Drive Shaft. (Three types of Disc can be
selected according to the processing requirements)
Put the Drive Shaft into the Bowl
5）Please put in the appropriate proportion of our rst, then start the machine to ensure that the Dough Hook works rst, then evenly
and slowly pour into the appropriate proportion of water, do not pour water
too fast, so that water can not form paste with the our
6
To Next Page
Loading...