4
5
6
7
Put the Drive Shaft into the Bow
Put the our into the Bowl. The our should not exceed 500g
① Insert the power cord into the power supply, and rotate the switch to 1
shift and start working. Each working time should be less than 3 minutes.
② Pour slowly water into the Bowl through chute on the Bowl Lid when
the product start working. Don't pour the water too fast.
① Cover the Blow with the Bowl Lid.
② Rotate the Bowl Lid clockwise into the Bowl.
When the "click" is heard, it means that the Bowl Lid has been rotated in the right
position, The product does not work if the Bowl Lid is not in the right position
1）Make sure that the Dough Hook is placed rst when pouring the our inot the Bowl, so as to avoid the diculty to assemble the Dough
Hook.
2）Do not process hard food materials, such as coee beans, ice cubes, etc. to avoid cracking Bowl and deformation blunt of Dough Hook.
3）Ingredient should not exceed the maximum calibration line of the Bowl, otherwise the crushing eect and life of the product will be
aected.
4）When there is ingredient sticking to the Dough Hook and Bowl, please be sure to turn o the power, then take out the food.
CAUTION
5
To Next Page
Loading...