Maintaining water supply mop kits
1
Separate the mop from the water tank mop kit
after nished operating.
• Please just pull out the water tank mop kit by
hands.
• If it is hard to pull out, please twist it a little bit.
2
Open the rubber cap to dry out inside of water
tank after pour remained water.
This is not a malfunction. Please check
LED lamp is OFF
If the machine does not work for 5 min.
It automatically power off together with LED
lamp.
If you press a operation button for 2 sec.
LED lamp will be turned on with power on
status.
•
•
LED OFF
LED ON
Sound alarm while its operation
After 50minute cleaning, the main unit sounds
the alarm to change mops and ll water in the
water supply mop kit.
For the better cleaning, replace with new mops
and ll water after charging.
•
•
Blue Blinks
17
To Next Page
Loading...
