3
English
Q&A
5. Connect the 6/6+2-Pin PCI-E cables to your graphics card(s).
NOTE: Do not attempt to plug an 8-Pin PCI-E cable into a 6-Pin connector without first detaching the
two extra pins.
6. Connect SATA power cables to all data drives or optical drives (hard drives, solid state drives, optical drives).
7. Connect the peripheral “Molex” 4-Pin connectors for fans, pumps, legacy components and other
devices/adapters.
8. Connect the AC power cord to your power supply and to the wall. Check all connections to assure a solid
connection and turn the power switch on the power supply to the ON position.
Q. If I have an issue or a question, can I get support?
A.
ALL EVGA products are backed by top tier warranties as well as 24/7 technical support. Support can be reached
for your power supply at:
- USA:
+1-888-881-3842 option 1, option 3. or contact us via email at support@evga.com.
- Europe:
+49 89 189 049 11 or by email via eu.evga.com/support.
Q. What is the ECO Thermal Control System?
A. The ECO Thermal Control System, when enabled, allows the fan on your EVGA power supply to shut off
during low to moderate operation loads. The EVGA power supply’s fan will automatically turn back on when
needed, based on the temperature the power supply reaches. The fan will also increase in RPM when needed,
based on the load operation being requested from the components connected. This prevents unnecessary
rotation, reduces ambient noise levels and will increase the life span of the fan due to the fan not spinning
when not required.
Please Note: If the ECO Thermal Control is disabled the fan will always spin, even at low loads. The fan will also
increase in RPM as needed automatically, based on the power draw from connected components.
450W / 550W / 650W / 750W / 850W BRONZE
Power Supply User Manual
5 6
7
8
To Next Page
Loading...
Need help?
General
