EVGA 550 BP - Introduction to EVGA BP Power Supplies; Safety Information; Critical Safety Warning; Product Features

02
Precision is power, as the BP power supplies add another aordable option to EVGA's 80 PLUS
®
Bronze-certified
lineup, while reducing the overall length to 120mm - EVGA's shortest ATX power supply to-date! The BP power supplies
feature a 115mm hydraulic bearing fan to ensure that staying cool and quiet is no tall order. Combining a full suite of
protections and EVGA's 3 Year Limited Warranty, this power supply should be on the short list for your next system build.
Introduction: Premium Power
Safety Information
WARNING : This unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will void the
product’s warranty. EVGA will not be responsible for any result of improper use, including but not limited to, any use of the
product outside of its intended purpose or use inconsistent with the warranty terms available online. (Warranty information is
available at www.evga.com/support/warranty and this manual is available at www.evga.com/manuals).
Features
The BP series has outstanding electrical performance with ultra stable voltage and extremely clean power output.
This can help you achieve the highest possible overclock (optional) and provide the most stable and reliable power
to all components. The BP series also has high eciency up to 85% (115V~) / 88% (230V~) eciency and is 80
PLUS
®
BRONZE certified.
STABLE POWER
TOP QUALITY PROTECTIONS
The BP series comes equipped with the most comprehensive protection set possible, including Over Voltage
Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection (SCP),
Over Current Protection (OCP), and Over Temperature Protection (OTP). This product is also covered by 3-year
warranty and EVGA’s legendary customer service and support.
Installation
1. Remove the power supply from its packaging.
2.
Use the screws provided with your case to install the power supply into
your computer. NOTE : It is recommended to install the power supply with
the fan facing down. However, if your case places the power supply at the
bottom of the case and there are no ventilation holes available, it may be
best to install the power supply with the fan facing up for greater eciency
and reliability.