Configuring the BIOS
61
Hot Key Power On
When
[Hot Key] is selected, the Hot key Power On function is
enabled so that you must select a keyboard key as the hot key. To select a
hot key use
Ctrl+F1 though Ctrl+F12.
Mouse Left
Mouse Right
Any Key
PnP/PCI Configuration Menu
Select PnP/PCI Configuration from the CMOS Setup Utility menu and press
Enter to display the PnP/PCI Configuration menu.
Figure 15. PnP/PCI Configuration Menu
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7:Defaults
Init Display First [PCI Slot]
Reset Configuration Data [Disabled]
Resources Controlled By [Auto(ESCD)]
x IRQ Resources Press Enter
** PCI Express relative items **
Maximum Payload Size [4096]
Item Help
Main Level `
POWER ON Function [Hot key]
x KB Power ON Password Enter
Hot Key Power On [Ctrl-F1]
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configuration
To Next Page
Loading...
Need help?
General
