Need help?Do you have a question about the Evh 5150III 6L6 2x12 and is the answer not in the manual?
General| Type | Tube |
|---|---|
| Number of Channels | 3 |
| Total Power | 50W |
| Preamp Tubes | 7 x 12AX7 |
| Power Tubes | 2 x 6L6 |
| Inputs | 1 x 1/4" |
| Outputs | 2 x 1/4" (speaker) |
| Effects Loop | Yes |
| EQ | 3-band |
| Footswitch | 4-button footswitch included |
| Construction Material | Birch |
| Speaker Size | 2 x 12" |
Input jack and channel select buttons for amp channels.
Gain, tone, and volume controls for clean and medium gain channels.
Gain, tone, and volume controls for the high-gain channel.
Presence, reverb, power level, and power lamp indicators.
Power input, fuse, and standby switch for amp operation and tube protection.
Ports for headphones, MIDI, footswitch, and effects loop connections.
Resonance control, impedance selection, and speaker output jacks.
Guide to assigning amp channels via MIDI program changes.
Bypass effects loop using MIDI control change messages.
Links to in-depth MIDI programming guides on the EVH website.
To Next Page
