22
4.7 Open a document and print it
Download the set of AxiDraw example files from http://axidraw.com/ex
The download is a small zip archive of example files. Open (unzip) the archive.
Then, within Inkscape, open up the file called AxiDraw_First.svg. Once open, the
document should look approximately like this:
If you cannot see the full page outline when you first open the file, select from
the menu View > Zoom > Page, or type the number ‘5’ on your keyboard.
Finally, open AxiDraw Control, switch to the Plot (first) tab of AxiDraw Control,
and click Apply to begin the plot.
To Next Page
Loading...
Need help?
General