To Next PageTo Next Page
Need help?Do you have a question about the Evinrude E-TEC 150 and is the answer not in the manual?
General| Alternator Output | 133 Amps Total / 50 net dedicated |
|---|---|
| Steering | Remote |
| Starting | Electric |
| Shaft Length | 20 in, 25 in |
| Gear Ratio | 1.85:1 |
| Horsepower | 150 HP |
| Engine Type | E-TEC |
| Displacement | 2592 cc |
| Bore x Stroke | 91 mm x 66 mm |
| Weight | 192 kg |
| Fuel Induction | E-TEC Direct Fuel Injection with stratified low RPM combustion mode |
Explains the use and importance of safety alert symbols in manuals.
Covers general rules and precautions for safe boating operations.
Safety rules and recommendations for outboard installation and maintenance.
Details safety information presented on the outboard itself via labels.
Covers requirements and procedures for outboard oil and fuel.
Step-by-step instructions for safely fueling the boat's tank.
Specifies the recommended types of fuel for the outboard engine.
Outlines crucial safety precautions during boat operation.
Procedures for starting and stopping the outboard engine correctly.
Explains the function and use of the engine cut-off switch.
Guide to adjusting the outboard's tilt and trim for performance.
Details the engine's failsafe speed adjustment system.
How to handle and prevent engine overheating issues.
Recommended maintenance schedule for the outboard.
Detailed steps for winterizing the outboard for long-term storage.
Guidelines and procedures for installing the outboard.
Information on matching outboard shaft to boat transom height.
Guidelines for choosing the right propeller for your application.
Technical specifications for 90 H.O. and 115 HP 60° V4 models.
Technical specifications for 115 H.O. and 130 HP 60° V4 models.
Technical specifications for 135, 150, 175 HP 60° V6 models.
Technical specifications for 200 HP 60° V6 models.
Technical specifications for 200, 225, 250 HP (3.3 Liter) models.
Technical specifications for 250, 300 HP (3.4 Liter) models.
