To Next PageTo Next Page
Need help?Do you have a question about the Evinrude E-TEC G2 and is the answer not in the manual?
General| Bore x Stroke | Varies by model |
|---|---|
| Full Throttle RPM Range | 5400-6000 RPM |
| Alternator Output | 133 Amps Total / 50 Net Dedicated |
| Lubrication | Multi-point targeted oiling |
| Cylinder Configuration | V6 |
| Gear Ratio | 1.85:1 |
| Starting | Electric |
| Engine Type | 2-stroke |
| Shaft Length | 20", 25", 30" |
| Fuel Induction | Direct Fuel Injection (DFI) |
| Emissions | EPA 2013 |
| Horsepower Range | 150 - 300 HP |
| Fuel Type | 87 Octane |
| Weight | 505 - 635 lbs (varies by model) |
Key safety instructions and warnings for operating the outboard safely.
Details on product specifications, illustrations, and reference materials.
Statement confirming compliance with relevant regulations.
Identification and explanation of labels found on the outboard for safety and operation.
Visual guide to identify outboard components for tiller and tilt models.
Information on recommended oils, fuel requirements, and fueling procedures.
Critical safety precautions for operating the outboard safely.
Step-by-step instructions for starting and stopping tiller-controlled outboards.
Procedure for connecting the fuel hose to the outboard.
Explanation and importance of the engine cut-off safety switch.
How to shift gears and control speed using tiller controls.
Instructions for starting and stopping outboards with remote controls.
Overview of different Evinrude remote control types and features.
Procedures for tilting the outboard on manual tilt models.
Adjusting the outboard's trim angle for optimal performance.
Information on operating power trim and tilt systems.
Description of the SystemCheck monitoring system and its indicators.
Explanation of warning indicators and their meaning.
Interpreting diagnostic LEDs on the EMM for system status.
Guidelines for operating an auxiliary outboard.
Precautions for operating in cold and freezing weather conditions.
Considerations for operating with multiple outboards.
How altitude affects outboard performance and adjustments.
Maintenance and care for operation in salt water.
Operating in weedy conditions and clearing weeds.
Precautions for operating in shallow water to prevent damage.
Procedure for towing or being towed.
Instructions and warnings for trailering the boat and outboard.
Guidelines for transporting and storing the outboard.
Information on emissions control systems and their maintenance.
Recommended maintenance schedule for inspections and servicing.
Procedures for service tasks like flushing and anode replacement.
Instructions for storing the outboard for short and long term.
Steps for preparing the outboard for service after storage.
Requirements for boat-mounted fuel and water-separating filters.
Guidelines for selecting and installing marine batteries.
Procedures for installing the outboard onto the boat's transom.
Guidance on selecting, installing, and repairing propellers.
Adjusting the trim tab to compensate for steering torque.
Adjusting throttle and steering friction for control.
Details on the emissions control system warranty and its coverage.
Form for updating owner information or transferring ownership.
