Need help?Do you have a question about the Evinrude E-TEC 250 and is the answer not in the manual?
General| Displacement | 3.4 L |
|---|---|
| Alternator Output | 133 Amps Total / 50 Net Dedicated |
| Steering | Remote |
| Trim Method | Power Trim and Tilt |
| Starting | Electric |
| Gear Ratio | 1.85:1 |
| Horsepower | 250 HP |
| Cylinders | 6 |
| Engine Type | E-TEC |
| Fuel Induction | E-TEC Direct Injection with stratified low RPM combustion mode |
| Shaft Length | 20 in, 25 in |
| Fuel System | Direct Injection |
| Weight | 240 kg / 528 lbs |
To Next Page