Need help?Do you have a question about the Evinrude 90 E-TEC and is the answer not in the manual?
General| Lubrication | Multi-Point Targeted Oiling |
|---|---|
| Starting | Electric |
| Steering | Remote |
| Trim Method | Power Trim and Tilt |
| Gear Ratio | 2.00:1 |
| Horsepower | 90 HP |
| Cylinders | 3 |
| Exhaust | Through Prop |
| Displacement | 1295 cc |
| Alternator Output | 81 Amps Total / 25 Amps Dedicated |
| Fuel Induction | E-TEC Direct Injection |
| Shaft Length | 20 in (508 mm) |
| Dry Weight | 145 kg (320 lb) |
| Engine Type | E-TEC Direct Injection |
| Full Throttle RPM Range | 5000 - 5500 RPM |
Provides step-by-step instructions for safely starting, stopping, and shifting the outboard's gears.
Guidance on correct oil type, filling the oil tank, fuel requirements, and system operation.
Details engine monitoring systems, gauges, warning lights, and control functions.
Procedures for handling impact damage, checking for damage, and methods for emergency engine starting.
Details recommended maintenance intervals and procedures to be performed by an authorized dealer.
Lists common symptoms encountered with the outboard and their potential causes and solutions.
Details the limited warranty coverage, conditions, exclusions, transfer policy, and consumer assistance.
To Next Page
