Evinrude 90 E-TEC User Manual

53

CONFIRMATION OF RECEIPT
Your Dealer
Upon delivery of your new
Evinrude / Johnson outboard, complete and sign the form below.
Your Dealer will take receipt of the form for their records.
Receipt
Name:
Address:
Name:
Address:
Owner of Model No:
Serial No:
(To be completed by customer or selling Dealer)
The Dealer named on this document has instructed me on the operation, maintenance, safety
features and warranty policy, all of which I understand and agree to be bound with. I am also satisfied
with the predelivery set-up and inspection of my
Evinrude / Johnson outboard. I have also received a
copy of the Operator’s Guide.
Signature:
Date:

Evinrude 90 E-TEC Specifications

General

Lubrication	Multi-Point Targeted Oiling
Starting	Electric
Steering	Remote
Trim Method	Power Trim and Tilt
Gear Ratio	2.00:1
Horsepower	90 HP
Cylinders	3
Exhaust	Through Prop
Displacement	1295 cc
Alternator Output	81 Amps Total / 25 Amps Dedicated
Fuel Induction	E-TEC Direct Injection
Shaft Length	20 in (508 mm)
Dry Weight	145 kg (320 lb)
Engine Type	E-TEC Direct Injection
Full Throttle RPM Range	5000 - 5500 RPM