Evinrude 90 E-TEC - Routine Inspection Checklist

30
Using Your E-TEC Outboard
ROUTINE INSPECTION CHECKLIST
Common Sense Pre-launch Checks (Each Use)
Periodic

Check fuel level.

Check function of steering, throttle, shift, and emergency stop circuit and lanyard.

Check condition of propeller.

Confirm operation of System Check self-test and warning horn.

Confirm the cooling system is operational (water intake screens and water pump
indicator).

Confirm this Operator’s Guide is onboard and readily accessible.

Check condition of anti-corrosion anodes (annually or every 100 hours).

Check for debris on propeller.

Clean and wax upper and lower engine covers (annually or every 100 hours).

In salt water applications, check lubrication points and corrosion protection. Use
Evinrude anti-corrosion spray or Evinrude “6 in 1” multi-purpose lubricant (annually or
100 hours).