Need help?Do you have a question about the Evinrude e-tec 2005 and is the answer not in the manual?
General| Year | 2005 |
|---|---|
| Horsepower | 200 HP |
| Engine Type | 2-Stroke |
| Fuel System | Direct Injection |
| Starting System | Electric |
| Steering | Remote |
| Fuel Type | Gasoline |
| Shaft Length | 20 in or 25 in |
| Oil Type | Evinrude XD100 |
| Cooling System | Water-cooled |
| Ignition System | Electronic |
Outlines routine and periodic maintenance tasks and their frequency.
Provides critical safety warnings related to engine operation and propellers.
Continues engine starting procedure, including neutral shift and throttle.
Describes the procedure for stopping the engine.
Explains how to shift gears and control speed.
Lists recommended oils and important considerations for oil usage.
Details fuel requirements, warnings, and safe handling practices.
Explains how to tilt the outboard up and down, with safety warnings.
Details how to adjust the outboard's angle for optimal performance.
Reinforces safety with the emergency stop switch and lanyard.
Explains the S.A.F.E. mode and procedures for engine overheating.
Discusses damage from hitting objects and post-impact inspection.
Lists essential checks before operating the boat.
Outlines periodic inspection and maintenance tasks.
Detailed steps for winterizing the outboard for long-term storage.
Provides guidelines for installing the outboard on a boat.
Detailed steps for mounting the outboard, including hardware and transom preparation.
Details the limited warranty terms, coverage, and exclusions.
Covers propeller selection, installation, and repair.
Lists technical specifications for the outboard engine.
To Next Page
