EasyManua.ls Logo

Evinrude e-tec 2005 - Product Information; Installation

Evinrude e-tec 2005
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
TROUBLESHOOTING
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE
Starter motor will not operate Shift handle not in NEUTRAL.
Fuse blown.
Engine will not start Not following starting instructions. Refer to Start-
ing, Stopping, Shifting
on page 12.
Fuel tank empty.
Fuel hose kinked.
Fuel system contaminated with water or dirt.
Fuel system not primed after running out of fuel.
Refer to
Fuel System Priming on page 14.
Fuel filter obstructed.
Throttle not at IDLE. Return throttle to IDLE.
Spark plugs incorrect. Refer to Specifications on
page 39.
Spark plugs improperly gapped, carboned,
burned, or wet.
Fuse blown.
Engine will not idle properly Debris on propeller.
Spark plugs damaged or incorrect. Refer to
Specifications on page 39.
Fuel system contaminated with water or dirt.
Engine loses power Spark plugs damaged or incorrect. Refer to
Specifications on page 39.
Fuel filter obstructed.
Fuel system contaminated with water or dirt.
Water intakes obstructed and cooling system not
operating correctly. Refer to
Engine Overheating
on page 21.
Oiling system malfunction.
S.A.F.E.
protection mode activated. Refer to En-
gine Overheating
on page 21.
Engine runs, but makes little or
no progress
Propeller hub loose, slipping.
Propeller blades bent or missing.
Propeller shaft bent.
Propeller debris.
Warning system activates Refer to Engine Overheating on page 21.

Related product manuals