Evinrude e-tec 2005 User Manual

39
 SPECIFICATIONS
SPECIFICATIONS
40 Models
Displacement 52.7 cu. in. (864 cc)
Engine Type In-line, 2 Cylinder, Two-Cycle,
Evinrude E-TEC
Full Throttle
Operating Range
5000 to 6000 RPM
Power
(1)
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
40 HP (29.8 kw) @ 5500 RPM
Idle RPM in Gear
(2)
(2) Emission Control Information.
850 ± 50
Idle RPM in Neutral
(2)
750 ± 50
Ignition Timing
(2)
Not Adjustable
Emission Control System:
per SAE J1930
(2)
ECM (Engine Control Module), Evinrude E-TEC
Fuel Requirements
(2)
87 Pump Posted AKI (90 RON) – Refer to Oil and Fuel on
page 15
Oil – Lubricant
– Capacity
TC-W3RL NMMA-certified oil or Evinrude/Johnson XD100 oil
– Refer to Oil and Fuel on page 15
2.0 qt. (1.9 l)
Spark Plug
(2)
Refer to ECI Label
Fuses Refer to Fuse on page 24
Fuel Filter In-line Replaceable
Gearcase – Lubricant
– Capacity
Evinrude Ultra-HPF ™
22 fl. oz. (650 ml)
Propeller Refer to Propeller Selection on page 37
Weight 232 lbs. (105 kg)
Sound at Driver’s Ear
(LpA) ICOMIA 39.94
76.8 dB(A)
Vibration at Tiller (arms) Less than 2.5 m/s
2
Transom Height 19 1/2 to 20 in. (495 to 508 mm)

Evinrude e-tec 2005 Specifications

General

Brand	Evinrude
Model	e-tec 2005
Category	Outboard Motor
Language	English