EasyManua.ls Logo

Evinrude e-tec 2005 - Routine Inspection Checklist

Evinrude e-tec 2005
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
ROUTINE INSPECTION CHECKLIST
ROUTINE INSPECTION CHECKLIST
Common Sense Pre-launch Checks (Each Use)
Periodic
Check fuel level.
Check oil level.
Check function of steering handle, throttle, shift, and emergency stop circuit and lanyard.
Check condition of propeller.
Confirm the cooling system is operational (water intake screens and water pump
indicator).
Confirm this Operator’s Guide is onboard and readily accessible.
Check condition of anti-corrosion anodes (annually or every 100 hours).
Check for debris on propeller.
Clean and wax upper and lower engine covers (annually or every 100 hours).
In salt water applications, check lubrication points and corrosion protection. Use
Evinrude
anti-corrosion spray or
Evinrude
“6 in 1” multi-purpose lubricant (annually or
100 hours).

Related product manuals