8
1. Install cook surface to burner unit by centering locating
tab over burner skirt.
2. Tab Step must be positioned to outside of burner skirt to
allow cooking surface to be centered.
Gently move cooking surface right to left
and front to back to locate tabs to skirt.
Cook Surface To Burner Unit
Never attempt to install cook surface when burners are
ignited. Failure to follow these instructions could result in
serious personal injury and property damage.
WARNING
Installing Cook Surface & Hood
Cook Surface Tab Step
Hood Hook
1. The Evo Companion hood can be removed from the cook
surface and temporally mounted to the drip pan between
cooking operations. To make this possible, there is a
hook mounted to the underside of the hood fastened by
the same screws that secure the hood handle.
2. Firmly grasp the hood handle and locate the hood hook
notches to the outside edge of the drip pan. Allow the
hood to rest freely on the drip pan.
3. To remove the hood from the drip pan, lift the hood hook
from the drip pan and place back on the cook surface.
Resting Hood On Drip Pan
To Next Page
