4 01-2018 5035 01
APPLIANCE POSITIONING
The appliance is not suitable for outdoor
installations. It must be installed in a dry
environment, with a temperature between
2°C and 32°C and cannot be installed in
environments where jets of water are used
for cleaning (e.g. large kitchens, etc.).
The appliance must be installed in
environments where it can be overseen
The appliance can be positioned close to
a wall but there must be a gap of at least 4
cm between the wall and the appliance for
ventilation purposes.
Under no circumstances should the ma-
chine be covered with cloths or similar.
The appliance must be placed on a level
surface.
Important!
In the event of unscheduled maintenance
work and/or repairs, the appliance must be
able to be accessed from all sides.
Therefore, make sure that the appliance
can be rotated so that the back and side
panels can be removed.
TECHNICAL SPECIFICATIONS
DimENsioNs
- Height mm 783
- Width mm 368
- Depth mm 586
- Depth with door open 854 mm
- Weight 44 kg
with cappuccino maker 47 kg
783
586
368
854
Fig. 2
ElEctrical coNNEctioN
- Voltage: 230/240 V∿
- Frequency 50/60 Hz
The electrical features are detailed on the
data tag located inside the appliance.
watEr supply
version water distribution pressure
between
standard * 0.05 and 0.85 MPa (0.5 - 8.5
bar).
plus 0.12 and 0.85 MPa (1.2 - 8.5
bar).
The appliance software has been designed
to manage the water supply from an inter-
nal tank (optional).
To Next Page
Loading...
Need help?
General
