Evolur aurora - CRIB ASSEMBLY - BACK PANEL ASSEMBLY; Connect Back Panel and Final Tightening

5
13
www.evolurbaby.com/help
CRIB ASSEMBLY - BACK PANEL ASSEMBLY
5a. Align the Headboard
(to which the Rear
Legs are attached),
to the Left and Right
Panel as shown in
the diagram.
5b. Insert the bolts (G)
inside the holes
provided on the
both the Side
Panels as shown.
5c. Ensure that the
alignment is right
and Panels are firm
before you start
using the crib. Do
not overtighten.
x 6 (2-3/8”) G