1
15
www.evolurbaby.com/help
CONVERSION MODES - DAY BED ASSEMBLY
1a. In order to convert the crib
to Full-Size bed, you must
first remove the Footboard
of crib.
1b. Fix the Right Top Cap (8) at
the top of the Right Front
leg and Left Top Cap (9) at
the top of the Left Front Leg
attached to the side panel,
with the help of Bolts (F)
provided. (Refer the
diagram)
1c. Then attach the Stabilizer
bar using the bolts from the
Footboard removal.
1d. Make sure to follow the
complete instructions
provided with the Toddler
Guard Rail.
Guard Rail and Stabilizer Bar (NOT INCLUDED, SOLD SEPARATELY)
NOTE:
* Make sure mattress support is
at the lowest position.
* Make sure to use Stabilizer
bar that is included with Evolur
Universal Toddler Guard Rail
(SKU- 846) to convert the crib
to day bed.
To Next Page
Loading...
