Evolur Stellar - Page 9

9
www.evolurbaby.com/help
2
BASSINET ASSEMBLY
2a. Locate the part labelled as
(A6) in the image. Insert the
sides of Middle Support
Frame (C) into the part (A6)
on both the sides.
2b. Gently push it into the side
slots (A6) until it clicks into
place as shown. Also, make
sure that the side rail (B) is
facing upward as shown in
the diagram.
“Click”
2b
(B,C)
(A6)
2a
(B,C)
(A6)