To Next PageTo Next Page
Need help?Do you have a question about the Evolute Impress and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Resolution | 300 dpi |
| Card Capacity | 100 cards |
| Connectivity | USB, Ethernet |
| Encoding Options | Magnetic stripe, contactless |
| Operating System | Windows |
| Power Supply | 100-240V AC, 50/60Hz |
| Card Thickness | 0.012" - 0.042" (0.3mm - 1.06mm) |
Procedure to power on the IMPRESS device using the SPST switch and status LED indicators.
Steps to search, connect, and establish a Bluetooth connection with the IMPRESS device.
Instructions for connecting and communicating with the IMPRESS via USB cable.
Guidance on how to swipe the magnetic card on the IMPRESS device.
Information on using the serial connector for interfacing with peripheral devices.
Details on connecting the adaptor for charging the IMPRESS battery and LED indicators.
Instructions for inserting primary and secondary smart cards into the IMPRESS device.
Steps to perform a test print by using the wake up and slide switches.
How to use the wake up switch to exit sleep or wait mode on the IMPRESS device.
Operation of the paper feed switch for advancing paper on the IMPRESS device.
Instructions on how to use the finger print scanner with the IMPRESS device.
