C
B
F
A
E
D
GRAVITY FED INSTALLATION INSTRUCTIONS
For the first few days to one
week of operation, both the
K1 Media and K1 Micro will
tend to float. This is perfectly
normal and will operate
normally as it begins to mature.
Figure 14.
20
INSTALLING YOUR NEXUS
1. Connect the pipework from your pond to the EazyConnector on the Nexus Inlet (A).
2. Connect your water pump to the 4”- 2” EazyConnector (B) on the outlet using suitable
pipe work. A valve should be positioned between the pump and the Nexus, to isolate the
Nexus during cleaning.
3. Pour the 50L K1 Media bag into the outside chamber (C) of the Nexus (Figure 14).
4. Connect your air pump to the Nexus air inlet (E).
5. Connect your water pump outlet to the remainder of your pipework including a UV.
6. Connect the waste valves (F) to your waste outlet.
To Next Page
Loading...